Lokar Shifter Knob Manuel d'utilisateur télécharger pdf

General Installation Notes:

Please read instructions completely before beginning installation.

If you have any questions please call.

Before starting installation, scotch vehicle tires to avoid accidental

movement of the vehicle. Do not attempt to install this product

while the engine is running.

We recommend applying anti-seize lubricant to all aluminum

threads before final assembly.

General Installation Notes:

Please read instructions completely before beginning installation.

If you have any questions please call.

Before starting installation, scotch vehicle tires to avoid accidental

movement of the vehicle. Do not attempt to install this product

while the engine is running.

We recommend applying anti-seize lubricant to all aluminum

threads before final assembly.

General Installation Notes:

Please read instructions completely before beginning installation.

If you have any questions please call.

Before starting installation, scotch vehicle tires to avoid accidental

movement of the vehicle. Do not attempt to install this product

while the engine is running.

We recommend applying anti-seize lubricant to all aluminum

threads before final assembly.

To Remove Shifter Knob:

Step 1: Make sure shifter is all the way forward in the Park position.

Step 2: Loosen the jam nut below the shifter knob by turning it clockwise.

Fig. 1

Step 3: For shifter knobs manufactured in 1995 and later, DO NOT loosen

or remove the set screw that is in the knob. Simply turn the knob

counter clockwise to remove it.

If your shifter knob has a tendency to try to turn back to its original

position when you let go of it, it is likely that your shifter knob was

manufactured before 1995.

For shifter knobs manufactured before 1995, remove the 1/4"-20

set screw using a 1/8" Allen wrench. Depress the release button and

hold it down. Rotate the knob 90 degrees (1/4 turn) counter clock-

wise, so that the set screw hole is at the 3:00 position. Fig. 2

While still holding the release button down, remove the #10-32 set

screw from the same hole, using a 3/32" Allen wrench.

Turn the shifter knob counter-clockwise to remove it.

To Install Shifter Knob:

Step 1: Make sure the jam nut is still in place on the shifter lever.

Step 2: For shifter knobs manufactured 1995 and later, screw the shifter

knob onto the shifter lever until the release button comes up flush

with the top of the shifter knob.

To Remove Shifter Knob:

Step 1: Make sure shifter is all the way forward in the Park position.

Step 2: Loosen the jam nut below the shifter knob by turning it clockwise.

Fig. 1

Step 3: For shifter knobs manufactured in 1995 and later, DO NOT loosen

or remove the set screw that is in the knob. Simply turn the knob

counter clockwise to remove it.

If your shifter knob has a tendency to try to turn back to its original

position when you let go of it, it is likely that your shifter knob was

manufactured before 1995.

For shifter knobs manufactured before 1995, remove the 1/4"-20

set screw using a 1/8" Allen wrench. Depress the release button and

hold it down. Rotate the knob 90 degrees (1/4 turn) counter clock-

wise, so that the set screw hole is at the 3:00 position. Fig. 2

While still holding the release button down, remove the #10-32 set

screw from the same hole, using a 3/32" Allen wrench.

Turn the shifter knob counter-clockwise to remove it.

To Install Shifter Knob:

Step 1: Make sure the jam nut is still in place on the shifter lever.

Step 2: For shifter knobs manufactured 1995 and later, screw the shifter

knob onto the shifter lever until the release button comes up flush

with the top of the shifter knob.

To Remove Shifter Knob:

Step 1: Make sure shifter is all the way forward in the Park position.

Step 2: Loosen the jam nut below the shifter knob by turning it clockwise.

Fig. 1

Step 3: For shifter knobs manufactured in 1995 and later, DO NOT loosen

or remove the set screw that is in the knob. Simply turn the knob

counter clockwise to remove it.

If your shifter knob has a tendency to try to turn back to its original

position when you let go of it, it is likely that your shifter knob was

manufactured before 1995.

For shifter knobs manufactured before 1995, remove the 1/4"-20

set screw using a 1/8" Allen wrench. Depress the release button and

hold it down. Rotate the knob 90 degrees (1/4 turn) counter clock-

wise, so that the set screw hole is at the 3:00 position. Fig. 2

While still holding the release button down, remove the #10-32 set

screw from the same hole, using a 3/32" Allen wrench.

Turn the shifter knob counter-clockwise to remove it.

To Install Shifter Knob:

Step 1: Make sure the jam nut is still in place on the shifter lever.

Step 2: For shifter knobs manufactured 1995 and later, screw the shifter

knob onto the shifter lever until the release button comes up flush

with the top of the shifter knob.

Lokar Shifter Knob Removal Instructions Lokar Shifter Knob Removal Instructions Lokar Shifter Knob Removal Instructions

INS0113 Rev. 05/21/13 RPD 03/13/14 INS0113 Rev. 05/21/13 RPD 03/13/14 INS0113 Rev. 05/21/13 RPD 03/13/14

Page 1 Page 1 Page 1

1 2

Page 1 Page 1 Page 1 1

Résumé du contenu

Page 1 - Page 1 Page 1 Page 1

General Installation Notes: Please read instructions completely before beginning installation. If you have any questions please call.Before starting i

Page 2

Lokar Shifter Knob Removal Instructions Lokar Shifter Knob Removal Instructions Lokar Shifter Knob Removal Instructions INS0113 Rev. 05/21/13 RPD

Commentaires sur ces manuels

Pas de commentaire

Lokar Shifter Knob Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Lokar Shifter Knob. Lokar Shifter Knob User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Lokar Shifter Knob